The wood chipper blade is an important part of wood mill equipment to pulverize and treat waste wood.
The waste wood enters the crushing chamber through the feeding port, and the blade of the wood crusher goes through the processes of beating, cutting, and grinding.
Pulverize the waste wood into sawdust, sawdust that meets the requirements of users’ friends,
It can flow out of the hole in the screen of the wood crusher, and the sawdust that can’t flow out will be continuously crushed in the crushing chamber.
Until you can pass through the holes in the mesh of the wood mill.
The crushing work of a wood crusher is the crushing work of the blade of a wood crusher.
After a long time of use, the blade of the wood crusher will inevitably be worn out,
The blade of the wood crusher becomes dull, which reduces the crushing efficiency of wood by the blade of the wood crusher.
Users friends wood chipper blade blunt, how to deal with it?
Wood mill manufacturers to users friends to clarify: wood mill manufacturers production of wood mill blade is manganese steel blade, rust.
Users do not have to worry about the wood crusher blade will rust.
Wood crusher manufacturers use square blades, wood crusher blades move in one direction,
The Angle of the blade in contact with the scrap wood is worn, so the wood shredder blade can be turned over to work at another Angle.
If the wear degree of the wood crusher blade is high, you can directly replace the wood crusher blade, wood crusher blade is a group of units,
The blade of the wood crusher should be replaced by one group, so as to avoid the difference in blade weight of different batches of wood crusher.
The vibration occurs when wood pulverizer equipment is working, which affects the normal work of wood pulverizer equipment.
Generally located in the middle of the tool shaft, the wood crusher blade wears more than the wood crusher blade at both ends of the tool shaft,
It is a good idea to replace the wood crusher blade directly if it is worn in the middle position of the cutter shaft.
Users can also combine the wood mill blade located at both ends of the cutter shaft with the wood mill blade located in the middle of the cutter shaft.
Change the position to maintain the working efficiency of wood crusher equipment.
Wood crusher manufacturers remind users’ friends, to regularly clean up the wood crusher crushing chamber,
Replace wood mill blades and maintain wood mill equipment.
The usual waste wood, often with paint, plastic, etc., is crushed together with the wood,
The impurities are separated from the crushed sawdust by means of wind sorting to ensure the purity of the sawdust.
Therefore, after a period of time in the wood crusher equipment work, the user friend to clean up the wood crusher crushing chamber,
Prevent the wood crusher crushing chamber paint fragments, plastic fragments stuck in the wood crusher crushing chamber,
Affect the working quality of wood mill equipment. What information do you want to know about the blade of the wood crusher?
You can contact us.