With the rapid development of the global economy,

People’s awareness of green environmental protection is also constantly improving,

At the same time, more and more attention is paid to the protection of the surrounding environment,

In our daily life, we often have the problem of waste wood accumulation,

We used to deal with this waste wood through accumulation, landfill, and incineration.

But this not only wasted a lot of manpower, material resources, and financial resources,

It also causes pollution to the surrounding environment,

But with the emergence of wood crusher equipment is effectively alleviate this problem,

Wood shredders are used to pulverize and process the waste wood,

And then they reuse it, but a lot of people have come across wood shredders.

After a period of use, there is a decline in output. What is the reason?

The first thing we need to know is that if production of wood shredders goes down,

Will directly affect the daily production plan, and then affect the economic benefits of the enterprise,

So once it is found that the output of wood crusher equipment has declined,

We should deal with it in a timely manner to prevent the problem from becoming more and more serious.

Know that a wood crusher is a crushing type of mechanical equipment, so its internal is more vulnerable parts,

And the blade is a vulnerable part, but also a very important part in the wood crusher,

Because the waste wood entering the crushing chamber is pulverized by a blade,

So if the blade is worn or damaged,

It will lead to a significant decline in the output of wood crushers,

At this point, we need to polish and repair the blade,

Of course, if the wear is more serious, it cannot be polished and repaired.

The problem can only be solved with a new blade.

In order to avoid severe wear of the blade,

It is recommended that you check the use of blades every day at the end of production,

Once it is found that there is wear, it should be polished and repaired in time to avoid more and more serious wear of the blade.

We can also inject some lubricating oil onto the blade surface,

In order to reduce the blade surface wear, prolong the service life of the blade.