Email:[email protected] Wechat:19157405032 WhatsApp:+86 19157405032 Address:Yinhu Industrial Zone, Tianhe District, Guangzhou city
company news
Your current location: Home > company news > How To Stop The Sawdust Pellet Machine
How To Stop The Sawdust Pellet Machine

The shutdown sequence of the sawdust pellet machine is opposite to that of the startup, and the shutdown sequence is from front to back according to the process flow. When the low material level indicator of the granulation bin shows no material, open the manual feeding door of the granulator and observe the material flow at the feeding port.

Stop the supply of steam or water and stop the discharge of the cooler, close the feeder and conditioner, then clean the ring die with oily materials, and then turn off the main motor of the sawdust pellet machine. Check the process of the granulation system: that is, check whether the cooler, elevator, return material pipe, centrifugal separator, grading screen, etc. have accumulated material. Turn off the main power of the sawdust pellet machine system, and do a good job of cleaning.

The bearings and oil seals used in the transmission part of the sawdust pellet machine are made of high-precision bearings and wear-resistant and temperature-resistant fluororubber oil seals, and a special lubrication oil return system is added, the oil circuit is circulated and cooled, and the oil is lubricated automatically and regularly to ensure that the bearings are fully lubricated and the operation is safer. reliable.