Email:[email protected] Wechat:19157405032 WhatsApp:+86 19157405032 Address:Yinhu Industrial Zone, Tianhe District, Guangzhou city
Pellet Machine
Your current location: Home > Products > Diesel Version Wood Pellet Machine

Diesel Version Wood Pellet Machine

Categories: Pellet Machine
Capacity: 100-300kg
Power: 15-32hp
Engine: Diesel engine
Tel:+86 191 574 05032
Email:[email protected]
WhatsApp:+86 191 574 05032

Product Application

Raw material and working principle

Biomass pellet raw materials from a wide range of sources, wood processing, and wood-based panels produced in the sawdust,

shavings, bark, sanding powder, waste wood, branches; All kinds of stalks produced after the harvest of crops;

Other kinds of combustible biomass as raw material, do not need to add adhesive, through the equipment processing, can be biomass pellet fuel.

Wood pellet machine is a belt and worm gear two-stage transmission, smooth rotation, and low noise.

It is a pelletizing machine popular with consumers.

The wood pellet motor drives the main shaft through the reducer, and the main shaft drives the press wheel.

The press wheel revolves around the main shaft and rotates around the grinding disc. Biomass,

when the particles are processed raw material is fed into a flat die machine feeding chamber,

under the common role of distributor and scraper evenly on the flat die, driven spindle roller continuous rolled material layer,

squeezing material into the die, material in the die hole forming type, such as process,

after a certain time in the cylindrical form being squeezed out, a rotating knife cutting the material,

the formation of particles, particles composed sweep plate will send out.

Product Features

1. It is widely used for pelletizing light substances, such as wood chips, sawdust, straw, pasture, chrysanthemum, palm leaf, and so on;

2. The feeder’s particular structure makes materials conveyed evenly. It is specially designed for pelletizing light substances with a density of 0.15-0.65g/cm3;

3. Feeder, conditioner, and chute are made of stainless steel with long service life;

4. It is with magnet and overload protection system which can protect the machine well during production;

5. It makes gear directly connect to the driver and with a quick-release die fixed by clamps,

which can increase the output by 15% more than the same type of machine with belt-convey;

6. The bearings and oil seals in the main drivers are imported from Japan to ensure highly-efficient, stability, and credibility.

7. The main drive adopts high-precision gear transmission, improving efficiency by about 20%.

8. High-quality imported bearings and oil seals are selected for the transmission part of the whole machine to ensure efficiency, stability, and low noise transmission.

9. The international advanced level of compensation type snake-spring coupling, with a novel structure, compact, safe, low fault, and other performance.

10. Strengthen the working strength of main working parts from materials, heat treatment, and other processes,

so as to meet the pelleting requirements of biomass particles.100-300kg per hour flat dies type wood pellet machine.

Product parameters

Model XD-200 XD-260 XD-300
Output 100-150 kg 200-250 kg 300-400 kg
Weight 400 kg 600 kg 800 kg
Diesel 15 hp 22 hp 32 hp
Applicable raw materials Wood and branches within 1 cm
Moisture content requirements 15%-20% 15%-20% 15%-20%
Diameter of abrasive tool (mm) 6-12 6-12 6-12
The whole machine size (mm) 1300*600*900 1500*650*1050 1650*700*1250
Equipment includes a battery, starter, charger, iron box packaging: additional water gauge, and other auxiliary tools.

Note: All the parts of the machine die press roll has been changed to alloy steel 20CrMnTi (20CrMnTi) with better quality and more wear resistance, the previous material is 42CrMo (42 CrMo).


    Your Name :
    Your Phone: