Email:[email protected] Wechat:19157405032 WhatsApp:+86 19157405032 Address:Yinhu Industrial Zone, Tianhe District, Guangzhou city
Rabbit feed pellet production line
Your current location: Home > Products > Rabbit Feed Pellet Production Line

Rabbit Feed Pellet Production Line

Categories: Feed Engineering
Capacity: 20t/h
Power: 608-868kw
Engine: Electromotor
Tel:+86 191 574 05032
Email:[email protected]
WhatsApp:+86 191 574 05032

rabbit feed pellet production line 6

Product Application

Flow process introduction:

Rabbit feed granules production line:

the production of rabbit feed granules is characterized by moderate grinding fineness (sieve diameter 2-4mm),

low requirements for curing and tempering (pellet mill adopts single-layer conditioner),

and large diameter of finished particles (about 2.5-4mm in diameter).

The dual-line SZLH508 rabbit feed is designed to produce 16-24 tph, with a single feed line of forage,

two grinding lines, one batching and mixing line, two pelleting lines, and two packing lines.

The total power of the equipment is about 800KW;

Construction area of the production area: 18×18×29.5m; Matching 2T boiler.

The whole line has a compact design, reasonable structure, and meets environmental requirements.

Definition of Rabbit Feed:

Rabbit feed refers to the general name of cultured rabbit, rex rabbit, and other rabbit feed,

is the special economic animal feed species in the feed classification.

Raw material:

Conventional rabbit feed concentrate feed raw materials include corn, wheat, barley, oats, sorghum, soybean,

soybean meal, fish meal, amino acid, miscellaneous meal, fat, meat and bone meal, grain,

feed additives and other feed raw materials of more than 10 varieties;

In addition, according to the needs of different breeds and rabbits in different growing periods,

alfalfa, straw, and other forage or raw materials of coarse fiber can be added to the raw materials.

Process flow:

Forage receiving and grinding process–Raw material receiving and cleaning process–Grinding process

–Batching and mixing process-Pelleting process–Bagging or bulk process–Auxiliary process

Forage receiving crushing section:

It is often necessary to add alfalfa, straw, and other raw materials of coarse fiber in rabbit coarse feed.

Raw materials receiving and cleaning section:
In this section, pellet feeding cleaning and powder feeding cleaning are separated independently and separate dust removal.
The dust removal effect is good.
Grinding section:
Because ruminant feed grinding fineness requirements are very thick, this section adopts two small power hammer mills,
and each set is allocated with two pre-grinding bins, which can grind different materials at the same time and improve efficiency.
Before entering the bins, the impurities are removed by a magnetic separation device to ensure the safe operation of the hammer mill.

Technological process chart:

This section adopts 16 batching bins( 2 bins are round bins for forage). Two sets of batching systems work at the same time.
It is developed by our company to realize accurate fast and slow feeding, fast batching, and high precision.
Because the formula contains a certain amount of grass flour raw materials, the proportion of grass flour is small,
volume is large, and it is easy to get into the roof, so the two grass powder bins discharge the material to choose the disc feeder,
the discharge machine also chooses the large moel equipment, and the batching bucket is enlarged.
At the same time, the batching sequence controlled by the batching program is optimized.

Granulation part:

This section adopts two sets of single-layer pelletizer and each set with two pre-pelleting bins,
which is convenient to switch between varieties. After pelleting,
they are respectively entered into the cooler and the elevator into the rotary screener in order to be screened,
and the finished products are put into the packing bins.
The others are back to granulation or bags receiving. At the same time, the bulk trucks are designed to pack and transport.

Auxiliary part:

Dust removal system, improve the working environment of workers;  Fat-adding system,

feeding in a common mixer to improve feed quality  Palatability.  


Product parameters

Moder SZLH508
Forage grinder MFSP68*108, 55kw, side feed, output 3-5t /H; Secondary grinding: MFSP568 – Ⅱ, 37 kW, output 4-6 t/h.
Cleaning equipment granules cleaner SCY80,capacity 20-30T/H; powder cleaner SQLZ60X50X100, capacity 10-15T/H.
Grinding equipment(2sets) Hammermill SFSP668×800, 55kw&75kw, designed to produce 15-20t /h/set(¢4.0mm screen hole)
Weighing equipment Dosing scale PCS20(customized and enlarged)/PCS05, dosing precision: dynamic ≤3‰, static ≤1‰.
Mixing equipment mixer SHSJ4, (30KW, 2000kg/ batch), designed to produce 24-30t /h. Mixture uniformity CV ≤5%.
Pelleting equipment(2sets) SZLH508, 160KW, designed to produce 8-12t/h/set.
Cooling equipment(2sets) SKLN6, designed to produce 10-15t/h/set.
Packing equipment Belt scale (it can be used as powder feed or granule feed), packing range: 20-50kg/ bag, 6-8 bags/minute.
Auxiliary section


Dust removal system to improve workers’ working environment; Grease adding system, common mixer place added to improve feed


    Your Name :
    Your Phone: