When the sawdust pellet machine slips under axial pressure, it will not only affect the output of the manufactured pellets but also seriously affect the pellet output. Therefore, we need to pay attention to this issue to ensure the production efficiency and quality of the equipment. So what is the reason for the axial pressure slippage of the sawdust pellet machine?

1. The bearing installation of the sawdust pellet machine is not flexible enough to cause the axial pressure to slip

When installing the pressure-kun bearing of the granulator, do not install it too tightly, otherwise, it will cause the granulator to slip during the granulation process. Treatment method: always pay attention to the shaft pressure of Yakun, even if the shaft pressure is replaced with a new one.

2. Too much moisture in the granular raw material will affect the axial pressure and slip

When using a sawdust pellet machine to press raw materials, if the water content of the raw materials is too high or the steam generated by the pellet machine is too large, it will cause the axial pressure of the pellet machine to slip due to moisture lubrication During the operation of the pellet machine. Treatment method: reduce the amount of raw material steam, and control the amount of water contained in the material within a reasonable range.

3. If the axial pressure gap of the sawdust pellet machine is too large, it will affect the axial pressure and slip

When using a sawdust pellet machine, if the gap between the equipment and the axial pressure cannot be controlled, the axial pressure will slip during the granulation process. Treatment method: The distance between the two main shafts of the wood pellet machine can be reduced.

4. Excessive use of axial pressure will affect axial pressure slippage

The long-term use of the sawdust pellet machine will cause the axial pressure to wear and the parts to fail, which will cause the axial pressure to slip and fail to work normally. Treatment method: not only to keep the wood pellet machine clean but also to replace the new shaft pressure at any time.