1. Preparations and precautions for starting the wood pellet machine

① Open the observation door of the feeder of the wood pellet machine to check whether there are iron filings and other sundries.

② Check each activity link to ensure that the wood pellet machine is not stuck.

③ Start the feeder, then stop when the feeder is running at a low speed.

④ Before starting the main motor, first check and ensure that all the moving parts in the wood pellet machine can run freely, and then check and ensure that the ring die rotates counterclockwise. Then adjust the two pressure rollers so that the surface is in slight contact with the inner surface of the rotating ring die, and under the action of the ring die, it can achieve seemingly rotating but not rotating.

Note: Try not to let the wood pellet machine do unnecessary idling for a long time without materials, so as to avoid unnecessary damage to the ring die and pressure roller.

⑤ Make sure that there is enough material in the hopper on the feeder of the wood pellet machine, and that it flows into the feeder evenly and continuously.

2. Pelletizing operation and precautions of wood pellet machine

To start the wood pellet machine, the following steps should be followed:

① First start the wood pellet machine and follow up with equipment.

② Start the main motor of the wood pellet machine.

③ Start the motor of the feeder and control the speed of the motor of the feeder to the resistance so that the material slowly enters the feed port of the wood pellet machine and the ring dies.