Wood pellet machine mold cracks increase the cost of machine production. In use, how to prevent wood pellet machine mold cracks? As a granulator manufacturer, you should control the material, hardness, and heat treatment uniformity of the mold from the source set the appropriate compression ratio according to the user’s material, and inform the user of the precautions. Only by starting from the following points can the cracking of the wood pellet machine mold be well reduced or reduced.

1. Coordinate with the wood pellet machine manufacturer to configure a compression ratio mold suitable for your own materials.

2. Reasonably adjust the die clearance of the wood pellet machine to avoid die breakage caused by too small die clearance.

3. The replacement of materials should be done step by step, the transition time should be extended, and repeated tests should be done.

4. The feeding equipment of the wood pellet machine is equipped with an iron removal device to minimize the entry of metal into the biomass pellet machine.

5. Improve the uniformity of raw material feeding, use the feeding equipment to set the frequency conversion and inserting board, and accurately adjust the operating speed and the feeding amount of the wood pellet machine.

6. Handle with care during maintenance to avoid damage to the wood pellet machine mold caused by falling.

Generally speaking, the mold of the wood pellet machine is not cracked suddenly but is caused by long-term disease operation or improper maintenance. Therefore, as long as the above points are realized, the mold cracking of the wood pellet machine can be reduced or avoided.