Email:[email protected] Wechat:19157405032 WhatsApp:+86 19157405032 Address:Yinhu Industrial Zone, Tianhe District, Guangzhou city
company news
Your current location: Home > company news > Wood Pellet Machine FAQ
Wood Pellet Machine FAQ

1. The output of the wood pellet machine is too low or has no output:

cause of the issue:

01. The first time the mold is used, the finish of the mold hole is poor;

02. The pressure roller or mold is aging and severely worn;

03. The moisture content of the material is too high or too low; the gap between the pressure roller and the mold is too large;

04. The V-belt of the wood pellet machine is aging or slipping.

solution:

01. Grinding and lubricating with oil-containing materials, the output can be increased after working for a period of time;

02. Replace the pressure wheel or mold of the wood pellet machine;

03. Adjust material moisture;

04. Tighten the pressure wheel bolts; replace the belt.

2. There is too much powder in the finished product of the wood pellet machine

cause of the issue:

01. Low moisture content;

02. The mold of the pressure roller is seriously worn.

solution:

01. Increase the moisture content;

02. The wood pellet machine is replaced with a new mold.

3. The surface of the wood pellet machine is rough:

cause of the issue:

01. Excessive moisture content;

02. The mold is used for the first time.

solution:

01. Reduce moisture content;

02. Repeated grinding with oil.

4. The wood pellet machine has abnormal noise:

cause of the issue:

01. Fall into hard debris;

02. Bearing damage;

03. The screw is loose.

solution:

01. Shut down the wood pellet machine for cleaning;

02. Replace the bearing;

03. Tighten the screws.

5. The wood pellet machine suddenly stops

cause of the issue:

01. The wood pellet machine is overloaded (the fuse is blown);

02. Foreign objects fall into the machine cavity;

03. The voltage is low or the motor power is not enough.

solution:

01. Appropriately increase the gap between the pressure roller and the mold;

02. Shut down the wood pellet machine to clean up foreign objects;

03. Replace the wire or motor.