+86-189 9846 0024
The selection of cutting tools for wood pellet machine, the sharpness of cutting tools directly affects the quality of chipping. There are two types of flying knife blades: single-edged and double-edged. In order to ensure the sharpness of the blade, the blade should be ground and replaced regularly.
In recent years, as the country advocates low-carbon and environmentally friendly life, new fuels are welcomed by people. As a biomass fuel pellet machine, wood pellet machine is welcomed by many customers. However, some customers have reported that the device vibrates while working. The following is a summary of the reasons for the vibration of the wood pellet machine:
Every time the wood pellet machine runs for one hour, a small amount of lubrication is given, and butter is added to the rollers at the end of each process to prevent materials from entering.
The wood pellet machine is suitable for a wide range of raw materials, and the pellet fuel produced has the characteristics of clean combustion, effective environmental protection, and energy saving. With the further development of environmental protection, the wood pellet machine not only realizes turning waste into treasure but also improves the value of crops and promotes the environment and promote economic development.
If the water content is too high, there will not be too much powder, but the hardness of the particles is low, and the particles are easy to loosen. If the moisture content in the raw material is low, it is difficult to form too much powder. At this time, the moisture content of the raw material of the wood pellet machine should be properly controlled.
he pressure wheel in the wood pellet machine is an integral part of the compression chamber, it needs to rotate continuously to make the material squeeze out from the die hole under the action of the pressure wheel.
Navigation
Products
Contact Us
+86 19157405032